How to Make a DIY Alarm/Tripwire (part 1) - ArewaOnline ArewaOnline : How to Make a DIY Alarm/Tripwire (part 1)

Pages

Featured Featured
how-to-use-your-android-device-as
Techwise Blogger Template By 24clan Team
dent-free-data
Liberty 3 Column Blogger Template By 24clan Team
9mobile-special-offer
Publisher V7.5.1 Premium - WordPress News Template By 24clan Team
mtn-double-data-cheat
Sahifa v5.6.10 Premium Wp Theme By 24clan


Sunday 29 March 2020

How to Make a DIY Alarm/Tripwire (part 1)


Follow these simple steps and you will soon have an awesome little gadget that alerts you to any unwanted intruders. You will immediately get a call on your phone alerting you that your tripwire has been activated.

 Supplies and Tools You Will Need:

    1 Pre-paid phone (We used a $10 Tracfone)
    1 Soldering Iron (You can get a cheap one at Radio Shack)
    60/40 Rosin-Core Solder
    Some wire
    1 Box cutter
    1 Small phillips head screwdriver
    1 Hot glue gun with glue
    Tin Foil
    1 Clothespin



Step 1:

Begin by following the instructions in the phone’s manual to activate the phone. We went online to activate ours, but if you don’t have an internet connection there’s a number you can call as well. All of this information can be found in the box that the phone came in.


Step 2:

Next, we need to program the phone’s speed dial function to call your phone number when the number 8 key is held down.

First, Enter your phone number into the phone by going to: Menu >> Contacts >> Add New Contact

Once you’ve added yourself to the phone’s contact list, pair your number with the phone’s number 8 key by going to: Menu >> Contacts >> Speed Dial List



Select cell number 8, and then select your name from the contacts list.



 
 
If you’ve done this correctly, it will look like this.


Step 3:

Remove the screws from the back plate and disassemble the phone. There are five screws total.



he arrows show you where you will find the screws you need to remove.

Use a small Phillips head screw driver to remove the screws.



Step 4:

Once the screws are out, you can use your box cutter to pry the back plate from the front plate. It takes a bit of force and will make a loud snapping sound as it separates, so don’t worry about breaking it because you wont. Once you’ve created some space with the box cutter, you can use your fingers to do the rest of the 




Copy the link below and Share with your Friends:

Download Our Official Android App on Google Playstore HERE
OR
Download from another source HERE



No comments:

Post a Comment